| 1. | Strain - gauge load cell or force transducer , minimum load impedance 320r 应变测压元件或传感器的最低负载阻抗为320r 。 |
| 2. | Allowable load impedance 允许的负载阻抗 |
| 3. | Beam loading impedance 射束负载阻抗 |
| 4. | Antenna load impedance 天线负载阻抗 |
| 5. | Technically , the damping factor is the specified load impedance ( in use , that ' d be the speaker system ) divided by the amplifier ' s output impedance 技术上,阻尼因子就是指定的负载阻抗(实践中,也就是扬声器系统)除以放大器的输出阻抗。 |
| 6. | In this paper , it introduces an automatic impedance matching system that can accomplish matching with the dynamic load impedance in highpower microwave system 本文构建了一个能为大功率微波系统的动态负载提供匹配的自动阻抗匹配系统。 |
| 7. | Technically , the damping factor is the specified load impedance ( in use , that ' d be the speaker system ) divided by the amplifier ' s [ i ] output impedance [ / i ] 技术上,阻尼因子就是指定的负载阻抗(实践中,也就是扬声器系统)除以放大器的输出阻抗。 |
| 8. | The sinusoidal voltage and current distribution on the line of each frequency component is obtained by the phasor equation for the transmission line and the source and load impedances 将传输线上不同位置电压及电流之频谱以快速富氏反转换即得传输线上不同位置之近似电压及电流脉波。 |
| 9. | A pulldown resistor to the negative rail will allow the output to approach that rail ( provided the load impedance is high enough , or is also grounded to that rail ) , but only slowly 一个下拉电阻器将允许输出迫近迫近该电源轨(所提供的负载阻抗足够高,或负载也是接地的) ,但这样速度较慢。 |
| 10. | We can also see that because damping factor is a ratio that requires the load impedance to compute , it must be stated against some known impedance to be meaningful 我们还可以看到因为阻尼因子是一个比率值,而且需要负载阻抗已知才能够进行计算,所以阻尼因子必须和某一已知的阻抗同时具明才有意义。 |